Building Materials & Real Estate

Surveying drone hits tower crane on Manchester site despite obstacle avoidance

An AAIB bulletin says the aircraft was on a pre-selected survey flight when it struck the crane and fell 120 m; no formal investigation was opened.

Maren KjellbergNovember 12, 20265 min read17 views
A conceptual illustration shows a surveying drone flying near the top of a tower crane above an urban construction site.

A surveying drone struck the top of a tower crane on a construction site in the Cheetham Hill area of Manchester in August, according to the Air Accidents Investigation Branch.

The AAIB said in its latest bulletin that the unmanned aircraft was carrying out an aerial survey over a construction site in an urban area on a pre-selected flight path. The obstacle-avoidance feature was enabled, but the drone struck the top of the crane and fell 120 m to the ground.

The incident was notified to the AAIB, but no formal investigation was launched. The bulletin did not identify the site or the contractor.

An internal investigation by the construction company found that the company and its remote pilots may not have fully understood the limitations of the obstacle-avoidance software, the AAIB bulletin said.

The bulletin records the drone's pre-selected route, the active obstacle-avoidance setting and the fall from the crane top without identifying the site or contractor. It also sets out the construction company's internal finding about the possible limits of the software.

The account points to an operational risk for aerial surveys near construction sites: an automated safety feature can be enabled while the company and its pilots may still not fully understand its limitations. The AAIB bulletin does not identify the site or contractor.