Instruments & Meters

SinceVision Launches Wide-Spot Laser Sensor for Rough-Surface Measurement

The SGI-N030W uses an expanded laser spot and synchronised sensor heads for micrometre-level measurement in battery, semiconductor and precision-assembly applications.

Zara MahmoudNovember 17, 20265 min read1 views
A conceptual illustration shows two wide-spot laser sensor heads above and below a moving electrode foil on a precision gantry in a clean industrial setting.

SinceVision has introduced the SGI-N030W, a wide-spot laser displacement sensor intended for high-speed, non-contact dimensional measurement on rough, textured and irregular surfaces. The product extends the company’s SGI Series and is aimed at lithium-ion battery production, semiconductor processing and precision mechanical engineering, where micrometre-level results are required.

The design uses an expanded laser spot and optical triangulation. Conventional point-spot sensors concentrate reflected energy on a small area, so scratches, grain boundaries, brushed textures and matte finishes can create signal variations that are read as dimensional changes. Such false defect warnings can trigger additional inspection.

By collecting reflected light across a broader patch, the SGI-N030W averages local microscopic peaks and valleys before signal conversion, according to SinceVision. The approach is intended to reduce the influence of surface roughness and optical scattering on materials such as drawn metals, sandblasted surfaces and coated battery foils.

Specifications and interfacing

SinceVision lists the following specifications:

  • Reference distance of 30 mm and measurement range of ±5 mm.
  • Repeatability of 0.05 µm on a diffuse white target under static conditions.
  • Linearity of ±0.02% of full scale across the measurement range.
  • Sampling frequency of 50 kHz, equivalent to a 20 µs update interval.
  • RS485, 100Base-TX Ethernet and switchable analogue outputs for 4–20 mA current or 0–10 V voltage signals.
  • Master-slave synchronisation for two sensors operating in opposition.

Battery electrode measurement

For battery manufacturing, SinceVision identifies in-line thickness measurement of lithium-ion electrodes as a principal application. Coating thickness and uniformity affect energy density, internal resistance and long-term cell stability. Contact micrometers or drop indicators used offline can introduce operator variability and may deform wet or uncured electrode material, while periodic spot checks do not provide continuous coverage across a production reel.

The proposed setup places two synchronised sensors above and below a moving electrode web. Mounted on a calibrated, low-thermal-expansion marble gantry, the heads measure clearance to the material; a controller combines those readings with the fixed mounting datum to calculate absolute thickness in real time. SinceVision reports production trials showing stable, repeatable measurement within ±0.3 µm at a web speed of 300 mm/s. The 50 kHz sampling rate is intended to provide sufficient longitudinal resolution to detect local coating agglomerations, edge thinning and exposed substrate before cell winding.

Other target applications

In semiconductor manufacturing, the non-contact method is intended for sensitive wafer surfaces. Potential uses include wafer position verification, edge detection, height measurement, and checks of wafer seating and chuck alignment in atmospheric transfer modules and vacuum load-lock systems.

For precision assembly, the sensor can monitor voice coil motors, linear actuators and micro-steppers. At 50 kHz, it is designed to capture transient displacement, mechanical oscillations, settling behaviour and end-stop overshoot across the full range. Position data can be sent to machine controls through the Ethernet interface for real-time monitoring.

Surface-related measurement errors

Jack Li, global sales and marketing director at SinceVision, said surface texture remains a recurring source of false defect warnings in battery manufacturing and precision assembly. He explained that conventional point-beam sensors can interpret microscopic scratches and rough coatings as actual thickness variations, slowing lines and creating manual inspection needs. The wider spot is intended to average out those variations, while opposing sensor heads support high-speed thickness verification.