Aluminum casthouses are under pressure to use more recycled metal without sacrificing melt quality, recovery rates or production efficiency. The difficult part is not only sourcing scrap. Lightweight post-consumer fractions, machining chips and other low-density materials are hard to introduce into conventional melting furnaces, so efficient feeding and submergence become central to recycling performance. The same operations must also hold temperature and chemistry uniform across the molten bath, which puts demands on circulation and stirring equipment.
Zmag America, Ltd. works in this specialized area of casthouse technology, developing magnetic solutions for molten-metal circulation, furnace stirring and scrap recovery. Its foundation is the industrial application of magnets and magnetic circuits. The company traces its history to magnetic engineering and the commercialization of eddy-current separation for recovering non-ferrous metals from mixed streams, then expanded into molten-metal applications. Its patented zPMC, or Zmag Permanent Magnetic Circuit, is the basis for equipment that stirs, circulates and submerges material in molten aluminum.
From magnetic circuits to molten metal
The distinction between permanent-magnet and conventional electromagnetic systems is central to Zmag's approach. Instead of a conventional electromagnetic stirring arrangement, zPMC uses a permanent magnetic circuit to generate the field that moves the molten metal. Zmag describes the resulting movement as a virtual impeller, because circulation is generated without conventional immersed mechanical impellers. That matters because conventional mechanical pumps rely on immersed rotating components that can deteriorate through exposure to molten aluminum, dross accumulation and contact with refractory debris.
Adoption remains a hurdle. In an August 2025 interview, Zmag America President Eishin Takahashi identified limited familiarity with the technology as a barrier in the United States, noting that aluminum producers globally tend to be conservative and more comfortable with equipment and processes they already know. The technical case therefore has to be made through operating references as much as through the principle itself.
MagStir is Zmag's non-contact stirring system for aluminum melting and holding furnaces. It uses the permanent magnetic circuit to create movement in the bath and support homogenization of temperature and alloy composition. Zmag offers configurations for furnaces from 15 to 200 metric tons. Because there is no immersed mechanical stirring component, the system is presented as an alternative for casthouses seeking better melt circulation without adding moving parts to the molten-metal environment. New Zealand Aluminium Smelters installed MagStir in a casting furnace and later extended its use to additional furnaces; a 2017 technical case study reported improvements in temperature control during furnace preparation. A MagStir unit was also fitted to a casthouse furnace at Rio Tinto-operated Boyne Smelters in Queensland, Australia, in 2019.
Pumping and scrap submergence
MagPump extends the approach to pumping and circulation. It is designed to fit a standard pump well without furnace modification. Unlike conventional mechanical pumps, it has no physical impeller and is marketed as a nearly hands-free alternative with no consumable parts and minimal downtime. At the TANDEM Division of US secondary aluminum producer TST Inc. in Fontana, California, a seven-week trial replaced an existing mechanical pump in a production furnace. The trial account described smooth operation and reduced disturbance to the molten-metal surface. TST plant management also reported that the system avoided the splashing seen with conventional pumping as the furnace metal level fell during draining. The technology was presented at the TMS 2023 Annual Meeting and Exhibition, where its use in side-well, multi-chamber furnaces was discussed, along with potential for gas injection and scrap submergence alongside metal circulation.
Typhoon addresses scrap submergence and chip melting. It is designed to introduce lightweight aluminum scrap and machining chips beneath the molten-metal surface rather than letting them remain on top of the bath. Its magnetic circuit generates a vortex-like movement that draws material into the melt, supporting heat exchange and recovery during remelting. At Neuman Aluminium's Marktl facility in Austria, the system was incorporated into a furnace modernization project intended to expand processing of low-density post-consumer scrap. The targeted material included lightweight fractions with a bulk density of about 375 kg/m³, which had challenged conventional charging and melting. Neuman set a target of one metric ton per hour while continuing to melt solid charge in the same furnace. During operation, Typhoon processed almost twice the planned scrap quantity within the expected time without disrupting normal furnace operations. The company also reported low operator involvement and no negative impact on melt or finished-product quality. According to the published technical account, Typhoon operates at 5-15 kW including its air-cooling blower and can submerge up to five metric tons per hour of machining chips; vortex intensity can be adjusted to maintain movement when scrap or alloying material is not being charged.
Evidence and competition
These cases are published technical accounts and company statements, not independent head-to-head trials. They indicate where the technology fits: furnaces needing homogenization, pumps that avoid immersed impellers, and scrap feeds that are hard to submerge. They do not establish universal performance across furnace designs, scrap mixes or charge practices. The permanent-magnet design removes the immersed impeller from the molten-metal environment, but each installation still depends on integration with the furnace, the pump well or the charging arrangement, and on operating practice.
The competitive landscape is established. ABB supplies its AL-EMS electromagnetic stirring system and reports more than 430 installations; in April 2026 it announced a further order from Arconic for a fifth stirrer at a Hungarian casthouse. Presezzi Extrusion Group, through its Melting Technology division, offers the L.E.C. Low Energy Consumption Stirrer for melting and holding furnaces, along with remelting and casthouse equipment. Pyrotek provides electromagnetic pump systems and LOTUSS low-turbulence scrap submergence, while its UK operations include EMP Technologies Ltd. Rockwell Automation sits in adjacent industrial automation, including furnace and ladle-shop control systems, as in its Mozal Aluminium casthouse project. Not all of these offerings are direct equivalents to Zmag's permanent-magnet approach, but they show that casthouses have alternatives and that incumbency matters.
The strategic question is whether permanent-magnet equipment can move from reference installations to repeatable, broad adoption. Rising use of challenging recycled feedstock makes molten-metal movement without immersed mechanical components more relevant. Zmag's cases at NZAS, Boyne, TST and Neuman provide evidence points. Wider acceptance will depend on whether those results can be repeated across furnace types and scrap streams, and whether producers become willing to move beyond the equipment they already know.
