Industrial Machinery

KraussMaffei Extrusion Introduces Single-Stage PVC InlineMixing for Roofing Membranes

The continuous process eliminates a separate hot-cold mixing step and dryblend storage, targeting lower energy, capital and operating costs plus greater formulation flexibility.

Nadia VargaNovember 17, 20265 min read2 views
A conceptual cutaway of a twin-screw extruder fed directly by gravimetric hoppers and liquid dosing lines, with a continuous PVC roofing membrane moving through calendering rolls in a clean industrial setting.

KraussMaffei Extrusion has developed a continuous single-stage process for making PVC roofing membranes, called PVC InlineMixing, which it positions as an alternative to the conventional two-stage route. Instead of preparing a dryblend in a separate hot-cold mixer and storing it before extrusion, the new line meters all solid and liquid ingredients directly into a twin-screw extruder.

In the established process, PVC powder, plasticizers, additives and fillers are combined batchwise in a heating-cooling mixer to form a dryblend. The material is cooled, held in intermediate storage and then plasticized in a twin-screw extruder before being formed into membrane. The InlineMixing approach removes the separate mixing and storage steps. Gravimetric dosing systems feed each component into the extruder as required, allowing the compound to be prepared continuously.

Cost and energy claims

According to KraussMaffei, the single-stage design lowers costs in several areas. Manufacturers do not need to invest in a separate heating-cooling-mixing combination, and the material is heated only once. The company says energy consumption and energy costs can fall by up to 75%, with the actual result depending on the formulation, system parameters and location.

Removing the standalone mixing stage also reduces the footprint of the complete system and lowers labor requirements. Maintenance expenditure is expected to be lower as well because wear parts for the heating-cooling mixer are no longer required. KraussMaffei links the combination of lower capital expenditure and lower operating costs to improved overall cost-effectiveness and the conditions for a rapid return on investment.

Formulation changes during operation

The continuous process is also presented as more flexible. Formula adjustments and color changes can be made directly during operation through the integrated control system, according to the company. This avoids the preparation and intermediate storage of separate dryblend batches, which can consume time when production needs to change.

Christopher Bartel, Head of Sales Flat & Foam at KraussMaffei Extrusion, says the approach offers roofing-membrane producers lower production costs, greater flexibility and more efficient manufacturing. In his view, manufacturers can respond faster to new requirements, adjust formulations during production and reduce both energy and capital expenditure.

Validation and industrial use

The process was developed at the KraussMaffei Extrusion Technology Center in Laatzen and tested with industrial roofing-membrane formulations. The trials used a co-rotating twin-screw extruder from the ZE 65 BluePower series, equipped with loss-in-weight feeders for all solid components and multiple liquid feeders for free-flowing formulation ingredients.

KraussMaffei says the ZE BluePower series has a Da/Di ratio of 1.65. It combines high torque with large free volume, creating a broad process window for different formulations. The tests confirmed what the company describes as excellent PVC gelation and high product quality. Mechanical properties and weldability also met industrial requirements across several formulations.

Bartel says the results demonstrate the potential of PVC InlineMixing for industrial roofing-membrane production. At the Technology Center, KraussMaffei works with customers to test their own formulations under production-relevant conditions, optimize the process and prepare the basis for industrial implementation.

The process is already running in an industrial production line for PVC roofing membranes. The reference plant reaches a total throughput of 1,800 kg/h with two extruders and two calenders. PVC, additives, fillers and the resulting edge trimmings are processed continuously into finished membranes. KraussMaffei says the combination of product quality and a leaner production route supports more cost-effective and flexible membrane manufacturing.